Compare Prices

0.375 Inch Round Nose


0.375 Inch Round Nose - Freud 3/8
Freud 3/8" Radius Round Nose Bit with 1/4" Shank

0.375 Inch Round Nose

Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wood signs. 3/4" Overall Dia (D), 7/16" Carbide Height (h), 1/4" Shank, 3/8" Radius ( R ), 2" Overall Length (H) Ideal For: Fluted millwork, signs and veining. Application: Fluted millwork, signs and decorative veining. Made In Italy.

  • Color: Perma-SHIELD Coating Red
  • Brand: Freud
  • ASIN: B00004T7DH
  • UPC: 100058664831
  • Part No: 18-112
0.375 Inch Round Nose - Yonico 34230-SC 3/8-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 3/8-Inch Shank
Yonico 34230-SC 3/8-Inch Dia. 2 Flute Ball Nose Spiral End Mill CNC Router Bit 3/8-Inch

0.375 Inch Round Nose

Best used for: Smooth contour milling & carving. • Cutting Diameter: 3/8" • Cutting Length: 1-1/4" • Shank Diameter: 3/8" • Overall Length: 3" • Flutes: 2 The ball nose end mills' rounded tip is designed to reduce tool markings on work pieces of intricate tool paths and varying depths. Larger bits will produce the smoothest results while smaller bits will produce the finest detail.

  • Brand: Yonico
  • ASIN: B00KZM3GR2
  • UPC: 765573829372
  • Part No: 34230-SC
0.375 Inch Round Nose - Sipery 2Pcs Round Nose Router Bits 1/4
Sipery 2Pcs Round Nose Router Bits 1/4" Shank Carbide Tipped 2 Flute Core Box Router Bit 3/8" Cutting Diameter for

0.375 Inch Round Nose

Specification Package: 2Pcs 3/8 inch Round Nose Router Bits Material: Carbide-tipped blade, 45# steel shank Color: Blue, Silver Tone Standard: 1/4 x 3/8inch Shank Diameter: 1/4inch (6.35mm) Cutting Diameter: 3/8inch (9.8mm) Cutting Radius: 4.9mm / 0.19inch Cutting Depth: 9mm / 0.35inch Overall Length: 42mm / 1.7inch Feature - 2-flute design help to remove chips and make your job clean and smooth. - This fluting cutter cuts half-round grooves for decorative columns, finger pulls, sill drip nails. - Teflon coating for build-up heat resistant; high grade carbide keeps its edge with no edge chipping. - Fit for cutting Wooden material, such as Wood, Hardwood, Softwood, High Density Fiberboard, Particle Board, etc. Safety Note - After clamping router bit, if found a beating when the bit working. Stop working, repeat the clamping several times, to make shank and clamping full contact, then working. - The shank should be in good contact with the clamping, The shank must be fully inserted into the clamping and tightening, to provide sufficient clamping force for router bit. - Can not just inserted small part into the clamping, it is easy to break the shank and damage router bit. - Please wear eyes and ear protection when working. - Your body, clothes and other sundries can not be close t...

  • Color: Blue
  • Brand: Sipery
  • ASIN: B07KT2YR8P
  • UPC: 610895309319
0.375 Inch Round Nose - Yonico 14360q Long Reach 3 Bit Core Box Router Bit Set 1/4-Inch Shank
Yonico 14360q Long Reach 3 Bit Core Box Router Bit Set 1/4-Inch

0.375 Inch Round Nose

Designed for sign making and general round nose grooving. Includes 3 core box router bits with diameters - 1/4", 3/8" & 1/2". With an overall height of 2-3/8", the Yonico 14360q router bit set is ideal for long reach core box grooving. Two flute carbide cutters and 1/4" Shanks.

  • Brand: Yonico
  • ASIN: B00KZM1SX6
  • UPC: 765573826517
  • Part No: 14360q
0.375 Inch Round Nose - Whiteside Router Bits 1411 Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
Whiteside Router Bits 1411 Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting

0.375 Inch Round Nose

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

  • Brand: Whiteside Router Bits
  • ASIN: B000K2C7OK
  • UPC: 785533394399
  • Part No: 1411
0.375 Inch Round Nose - Yonico 19103 3/4-Inch Diameter Core Box Router Bit 1/2-Inch Shank
Yonico 19103 3/4-Inch Diameter Core Box Router Bit 1/2-Inch

0.375 Inch Round Nose

This core box bit features a rounded tip with a 3/8" radius and a 3/4" cutting diameter. The cutting depth is 5/8" and the shank is 1/2". core box bits have rounded tips that are perfect for routing channels in cutting boards and producing flutes in columns using solid wood or MDF. Our core box bits are available in various diameters, with a choice of 1/4" and 1/2" shanks. The smaller shank diameter works well in laminate trimmers, while the 1/2" shanks are ideal for deep cuts with full-size routers.

  • Brand: Yonico
  • ASIN: B01MSX03R7
  • UPC: 765573834451
  • Part No: 19103
0.375 Inch Round Nose - Round Nose Router Bit 1/4Inch Shank Carbide Alloy Long Reach Cutter Tool 1/4x3/8inch
Round Nose Router Bit 1/4Inch Shank Carbide Alloy Long Reach Cutter Tool

0.375 Inch Round Nose

Round Nose Router Bit 1/4Inch Shank Carbide Alloy Long Reach Cutter Tool 1/4x3/8inch1/4x3/8 ″Feature:100% brand new and high quality.C3 micro-grain carbide alloy cutters.Solid body with anti-kickback design.Build-up & heat resistant coating.Practical, suitable for slot cutter,edge trimmer,cutting knife,etc.Specification:Material: carbide alloyColor: yellowShank type: round shankShank diameter: 1/4 ″ (6.35mm)Blade diameter: 3/8 ″ Coated: yes(Note: Please allow 1-3mm error due to manual measurement, and slight color difference caused by light and screen.)Package include:1pc x Router bit

  • Color: Yellow
  • Brand: RuiFengShun
  • ASIN: B07WZSLZK7
  • Part No: B3I6H7H511468A_US796
0.375 Inch Round Nose - 6-1/4 Inch Stainless Steel Rounded Nose Cross Lock Tweezers
6-1/4 Inch Stainless Steel Rounded Nose Cross Lock

0.375 Inch Round Nose

  • Price: 5 6
0.375 Inch Round Nose - 5-Inch Round Nose Pliers, Spring Action (Jewel Tool: TP-01057)
5-Inch Round Nose Pliers, Spring Action (Jewel Tool:

0.375 Inch Round Nose

  • Color: White
  • Price: 5 7
0.375 Inch Round Nose - Waymil Round Nose Pliers 4-1/2 inch (115 mm) Jewelry Beading Cratfs Wire Work
Waymil Round Nose Pliers 4-1/2 inch (115 mm) Jewelry Beading Cratfs Wire

0.375 Inch Round Nose

0.375 Inch Round Nose - 1/2 Inch Shank Core Box Ball Round Nose Router Bits 3/4 Inch Head Diameter Bits;1/2 Inch Shank Core Box Ball Round Nose Router Bits 3/4 Inch Head Diameter
1/2 Inch Shank Core Box Ball Round Nose Router Bits 3/4 Inch Head Diameter Bits;1/2 Inch Shank Core Box Ball Round Nose Router Bits 3/4 Inch Head

0.375 Inch Round Nose

  • Color: Silver
  • Price: 9
0.375 Inch Round Nose - 81408 Contractor Round Nose Bit, 3/4-inch Diameter, 3/8-inch Radius, 1/4-inch Shank, Make decorative doors, drawer fronts, signs or add a design to any other creative.., By CMT
81408 Contractor Round Nose Bit, 3/4-inch Diameter, 3/8-inch Radius, 1/4-inch Shank, Make decorative doors, drawer fronts, signs or add a design to any other creative.., By

0.375 Inch Round Nose

  • Price: 18 25
0.375 Inch Round Nose - C-74 Round Nose Chisel, 3/8-Inch, Heavy duty construction for strength and durability By Williams
C-74 Round Nose Chisel, 3/8-Inch, Heavy duty construction for strength and durability By

0.375 Inch Round Nose

  • Price: 19 24
0.375 Inch Round Nose - 81411 Contractor Round Nose Bit, 3/8-inch Diameter, 3/16-inch Radius, 1/4-inch Shank, Make decorative doors, drawer fronts, signs or add a design to any other creative.., By CMT
81411 Contractor Round Nose Bit, 3/8-inch Diameter, 3/16-inch Radius, 1/4-inch Shank, Make decorative doors, drawer fronts, signs or add a design to any other creative.., By

0.375 Inch Round Nose

  • Price: 15 28

0.375 Inch Round Nose Video Results

The Tool Database - Part 9 - Aspire Cut2D and VCarve For Absolute Beginners

0.375 Inch Round Nose

The Tool Database - Part 9 - Aspire Cut2D and VCarve For Absolute Beginners More down here ↓↓↓ Click SHOW MORE! This is the 9th in a series of videos geared toward the person who has never worked with CAD or CAM before. In this video, we’ll once again wade into controversial waters as I tack...

  • Likes: 190
  • View count: 4656
  • Dislikes: 0
  • Comments:
Tags: Aspire,VCarve,VCarve Pro,VCarve Desktop,Cut2D,Vectric,Tutorial,Beginners,CAD/CAM,CAM Software,CNC...

Combine 3D Models - Part 19 - Vectric for the Absolute Beginner

0.375 Inch Round Nose

Combining 3D Models - Part 19 - Aspire and VCarve For Absolute Beginners More down here ↓↓↓ Click SHOW MORE! This is the 19th in a series of videos geared toward the person who has never worked with CAD or CAM in the Vectric Software before. In this video, I’ll continue the journey into 3D ca...

  • Likes: 303
  • View count: 7648
  • Dislikes: 1
  • Comments:
Tags: Aspire,VCarve,VCarve Pro,VCarve Desktop,Vectric,Tutorial,Beginners,CAD/CAM,CAM Software,CNC Route...

How to cut Schluter Aluminum trim for tile edges

0.375 Inch Round Nose

Often times it will be necessary to use a metal aluminum trim instead of a bull nose to finish exposed tile edges, in this video I show how to make a clean crisp cut. Miters can be especially difficult if the correct tools are not used. A chop saw with a special metal cutting blade can make quick...

  • Likes: 89
  • View count: 69106
  • Dislikes: 16
  • Comments:
Tags: How to cut aluminum trim,Tile,Tiling,How to tile,tile installation,how to lay tile,tile shower,cu...


0.375 Inch Round Nose R2481 Search Results

Looking for more 0.375 Inch Round Nose similar ideas? Try to explore these searches: Rgb Component, Silk Duster Jacket, and Kitchen Necessities Handle.

Globeiz.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates