Compare Prices

1/2 Inch Barbed Insert


1/2 Inch Barbed Insert - Spears 1429 Series PVC Tube Fitting, Coupling, Schedule 40, Gray, 3/4
Spears 1429 Series PVC Tube Fitting, Coupling, Schedule 40, Gray, 3/4" x 1/2"

1/2 Inch Barbed Insert

The Spears 1429 series tube fitting is made of gray polyvinyl chloride (PVC) plastic and connects schedule 40 polyethelene (PE) pipe in a straight run. This coupler has barbed fittings on each end to create a tight seal on flexible PE pipe when used with a hose clamp (sold separately). PVC is corrosion resistant, and has high strength. It resists reactions with acids, gasoline, alcohol, and hydrocarbons. The fitting meets D 2609 standards set by ASTM International for plastic insert fittings for use with PE pipe, as well as ASTM schedule 40 standards for wall thickness to support working pressure to 140 psi. It is certified by NSF International for use with potable water. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO...

  • Color: Gray
  • Brand: Spears Manufacturing
  • ASIN: B009F3N4KQ
  • UPC: 054211105597
  • Part No: 1429-101
1/2 Inch Barbed Insert - One Stop Outdoor USA Made - 10-Pack - 1/2
One Stop Outdoor USA Made - 10-Pack - 1/2" Inch Drip Irrigation Connectors/Hydroponics Barbed Coupling Fitting, (Fits of 16mm.520" ID Drip

1/2 Inch Barbed Insert

16 and 17 mm (1/2") Barbed Fittings The brown 1/2" Barbed Drip Fittings are used in the installation of drip line with 18" spacing and with .600 ID x .700 OD drip tubing. Used by home gardeners and professional alike, the brown fittings are made of high-impact plastic, and are available in a variety of configurations. Using a double barb, two pieces of drip line or drip tubing may be pushed over the barbed sides of the fittings for a very tight fit. Features Special, extra sharp barb design for secure and easy installation without glue or clamps Fits brown PC drip line and polyethylene drip tubing with .600 ID x .700 OD One-piece construction Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions Available in a variety of configurations Products specifications Operating pressure: up to 30 PSI Color: brown Use with 1/2" drip tubing or drip line with .550 ID to .600 ID Material: Acetal

  • Color: Coupling
  • Brand: One Stop Outdoor
  • ASIN: B07G5LLF8H
  • UPC: 032748660321
1/2 Inch Barbed Insert - One Stop Outdoor USA Made 25-Pack - 1/2
One Stop Outdoor USA Made 25-Pack - 1/2" Drip Tubing Barb Adapter TEE Threaded Fitting MNPT (1/2" Tee x 17mm .600 ID Insert

1/2 Inch Barbed Insert

25-Pack - 1/2" Drip Tubing Barb Adapter TEE Threaded Fitting MNPT (1/2" Tee x 17mm .600 ID Insert Connector) 16 and 17 mm (1/2") Barbed Fittings The brown 1/2" Barbed Drip Fittings are used in the installation of DIG's brown PC drip line with 18" spacing and with .600 ID x .700 OD drip tubing. Used by home gardeners and professional alike, the brown fittings are made of high-impact plastic, and are available in a variety of configurations. Using a double barb, two pieces of drip line or drip tubing may be pushed over the barbed sides of the fittings for a very tight fit. Features Special, extra sharp barb design for secure and easy installation without glue or clamps Fits DIG's brown PC drip line and polyethylene drip tubing with .600 ID x .700 OD One-piece construction Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions Available in a variety of configurations

  • Color: 1/2 Inch MNPT Adapter Tee
  • Brand: One Stop Outdoor
  • ASIN: B076XG6XBK
  • UPC: 074528235206
  • Part No: 4336408565
1/2 Inch Barbed Insert - Spears 460 Series PVC Pipe Fitting, Adapter, Schedule 40, White, 1/2
Spears 460 Series PVC Pipe Fitting, Adapter, Schedule 40, White, 1/2"Barbed x 1/2"

1/2 Inch Barbed Insert

This Spears adapter pipe fitting, in white, is made of schedule 40 PVC and has a barbed insert end connection and a spigot end connection. This adapter fitting connects pipes or fittings with different end types, diameter, or materials. It has a barbed male insert connection for fitting into a flexible tube on one end and a male spigot connection for fitting into a female unthreaded pipe on the other end. The barbed end allows a quick connection to tubing and the spigot end has the same diameter as the pipe it connects to, minimizing turbulence and creating a tight seal. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermon...

  • Color: White
  • Brand: Spears Manufacturing
  • ASIN: B008I4FSS4
  • UPC: 054211723548
  • Part No: 460-005
1/2 Inch Barbed Insert - Lifegard Aquatics 1/2-Inch Bulkhead Fitting Kit
Lifegard Aquatics 1/2-Inch Bulkhead Fitting

1/2 Inch Barbed Insert

Custom installations are easier and safer with all parts included in this convenient 1/2-inch Slip kit Assembly.

  • Brand: Lifegard Aquatics
  • ASIN: B002DVWOIA
  • UPC: 788379305550
  • Part No: 1/2" Slip Kit
1/2 Inch Barbed Insert - Habitech Irrigation Fittings Kit for 1/2
Habitech Irrigation Fittings Kit for 1/2" Tubing 20 Piece Set - 6 Tees, 6 Couplings, 2 Elbows, 6 End Cap Plugs - Barbed Connectors for Rain Bird and Compatible Drip

1/2 Inch Barbed Insert

Every drip irrigation system depends on reliable, leak-free connection fittings to keep the system together. Your 20-Piece Habitech Irrigation Fittings Kit contains: 6 Tees - Create three-way layouts of poly tubing or drip line with barbed tees. 6 Couplings - Create two way layouts of poly tubing or dripline with barbed couplings. 2 Elbows - Create 90 degree layouts of poly tubing or dripline with barbed elbows. 6 Figure Eight Line End Closures - Plug the end of your poly tubing or dripline with these drip irrigation end caps. Product Specifications: For connecting emitterline and polyethylene tubing Use with 17mm emitterline and distribution tubing Economical one piece construction UV resistant high impact plastic Secure and easy installation without glue or clamps Operating pressure: up to 50 PSI Installation Tips: To use the fittings with drip tubing, push the tubing very firmly over the barbed side of the connector, tee, or elbow for a very tight fit that won't leak If you wish to soften the tubing before installing the fitting, let the tubing rest in the hot sun or briefly apply a heat gun or blow dryer to the tubing end before inserting the fitting If your system runs at pressures higher than 25 PSI, you may want to use ratchet clamps to secure the tube on...

  • Brand: Habitech
  • ASIN: B07CYX6BGH
  • UPC: 600151081653
  • Part No: 4336408901
1/2 Inch Barbed Insert - One Stop Outdoor USA Made - 10-Pack - 1/2
One Stop Outdoor USA Made - 10-Pack - 1/2" Inch Barbed Drip Tubing Connector/Adapter Cross TEE Fitting MNPT (Fits All Tubing Size 17mm .600 ID Insert

1/2 Inch Barbed Insert

10-PACK - 1/2" Barbed Drip Tubing Adapter Cross TEE Threaded Fitting MNPT (17mm .600 ID Insert Cross) FIT 4 SECTIONS OF DRIP TUBING TOGETHER::::: 16 and 17 mm (1/2") Barbed Fittings The brown 1/2" Barbed Drip Fittings are used in the installation of drip line with 18" spacing and with .600 ID x .700 OD drip tubing. Used by home gardeners and professional alike, the brown fittings are made of high-impact plastic, and are available in a variety of configurations. Using a double barb, two pieces of drip line or drip tubing may be pushed over the barbed sides of the fittings for a very tight fit. Features Special, extra sharp barb design for secure and easy installation without glue or clamps Fits drip line and polyethylene drip tubing with .600 ID x .700 OD One-piece construction Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions Available in a variety of configurations Products specifications Operating pressure: up to 30 PSI Color: brown Use with 1/2" drip tubing or drip line with .550 ID to .600 ID Material: Acetal Brown 1/2" (17 mm) Barbed Drip Fittings are available in a range of configurations for 1/2" drip line or drip tubing with .600 ID (17 mm); they provide a simple, low cost installation method. Using the double barbed fitti...

  • Color: Cross
  • Brand: One Stop Outdoor
  • ASIN: B07G5NB5JZ
  • UPC: 032748660345
1/2 Inch Barbed Insert - PEX X PEX Barb Tee Pipe Fittings 1/2 Inch Brass (pack of 10)
PEX X PEX Barb Tee Pipe Fittings 1/2 Inch Brass (pack of

1/2 Inch Barbed Insert

  • Color: GoldBrass
  • Size: 1/2\"1/2"
  • Price: 12
1/2 Inch Barbed Insert - SHARKBITE/CASH ACME 1/2-Inch Barb Insert x 1/2-Inch Male Pipe Thread Straight Stop 23061LF
SHARKBITE/CASH ACME 1/2-Inch Barb Insert x 1/2-Inch Male Pipe Thread Straight Stop

1/2 Inch Barbed Insert

  • Model: 23061LF
  • Color: MulticolorMulti
  • Size: 1/2\"1/2" CF X 1/2" MPT
  • Price: 8 7
1/2 Inch Barbed Insert - SharkBite® 23063LF Pex Chrome Plated Straight Stop, 1/2
SharkBite® 23063LF Pex Chrome Plated Straight Stop, 1/2" x 1/2" Barb

1/2 Inch Barbed Insert

  • Model: 23063LF
  • Color: White
  • Size: 1/2" CF X 1/2" CF1/2\"
  • Price: 7 14
1/2 Inch Barbed Insert - Rainbird XMTOOL Xeriman Tool, One-step installation of Xeri-Bug emitters, PC Modules and 1/4 inch barbed insert fittings By Rain Bird
Rainbird XMTOOL Xeriman Tool, One-step installation of Xeri-Bug emitters, PC Modules and 1/4 inch barbed insert fittings By Rain

1/2 Inch Barbed Insert

  • Price: 13 16
1/2 Inch Barbed Insert - PEX 1/2 Inch Barb Straight Coupling Crimp Fitting - Bag of 1 pc/Brass / 1/2
PEX 1/2 Inch Barb Straight Coupling Crimp Fitting - Bag of 1 pc/Brass /

1/2 Inch Barbed Insert

  • Size: 1/2\"1/2"
  • Price: 3
1/2 Inch Barbed Insert - UC274LFA Male PEX Barb Fitting (10 Pack) 3/4-Inch x 1/2-Inch Brass, Barb system offers lowest material cost By SharkBite
UC274LFA Male PEX Barb Fitting (10 Pack) 3/4-Inch x 1/2-Inch Brass, Barb system offers lowest material cost By

1/2 Inch Barbed Insert

  • Price: 9 16
1/2 Inch Barbed Insert - Libra Supply 1/2 inch PPSU PEX TEE, Barb x Barb, (Bag of 50 pcs, click in for more size options), 1/2-inch, 1/2'' Pex Fitting Plumbing Supply
Libra Supply 1/2 inch PPSU PEX TEE, Barb x Barb, (Bag of 50 pcs, click in for more size options), 1/2-inch, 1/2'' Pex Fitting Plumbing

1/2 Inch Barbed Insert

  • Size: 1/2\"1/2'' (50 Pack)
  • Price: 39

1/2 Inch Barbed Insert Video Results

About Barbed Insert Fittings

1/2 Inch Barbed Insert

Barbed fittings are used for lower pressure applications with flexible tubing, like rubber, vinyl, polyethylene, polypropylene, and others - think tap lines and soda fountains. Because they’re insert fittings, they’re sized by the inside diameter (ID) of tubing. Fortunately, most tubing has the I...

  • Likes: 40
  • View count: 16867
  • Dislikes: 2
  • Comments:
Tags: barbed fitting,plumbing,Piping And Plumbing Fitting,pipe fittings,prevent leaks,DIY,Do It Yoursel...

How To Fit Plastic Hose On A Barbed Fitting

1/2 Inch Barbed Insert

How To Fit Plastic Hose On A Barbed Fitting When building a pressure washing rig. http://www.firstchoicepowerwashing.com/ Thanks for watching! Curious about more? Leave your comments down below! Don't forget to like and subscribe for more tips for business and marketing. Facebook: https://www...

  • Likes: 87
  • View count: 14248
  • Dislikes: 3
  • Comments:
Tags: pressure washer,pressure washing,how to fit piping,pressure washing truck,How To Fit Plastic Hose...

Barbed Irrigation Pipe Fitings

1/2 Inch Barbed Insert

Mike Briley from Access Irrigation Ltd demonstrates how to fit barbed fittings to soft walled irrigation pipe. This neat fitting is suitable for low pressure watering systems where th pipework in laid on the bed.

  • Likes: 17
  • View count: 10301
  • Dislikes: 1
  • Comments:
Tags: Irrigation (Taxonomy Subject),barbed fitting


1/2 Inch Barbed Insert R8098 Search Results

Looking for more 1/2 Inch Barbed Insert similar ideas? Try to explore these searches: Griffin Motorcycle, Passenger Right Interior Door Handle, and Espana Canvas Art.

Globeiz.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates