Compare Prices

10 Mm 2 Flute


10 Mm 2 Flute - 10 pcs 4-Flute End Mill Bits, AFUNTA 0.08
10 pcs 4-Flute End Mill Bits, AFUNTA 0.08" - 0.47" HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel

10 Mm 2 Flute

Notice: - Stop immediately in the processing of anomalies when using the end mill bits and find out the reason before processing. - Pay attention to the condition of wear and tear of the cutting edge and timely repair the end mill bits. - Cleaning the end mill bits and use oil after using, keep end mill bits properly. Application: - End Mill Bits are used for side milling, end milling, finish machining, etc. - Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc. Specifications: Product Name: End Mill Bits Material: HSS Flute: 4 Flute End Mill Bits Cutting Diameter: 2mm/0.08in, 3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in, 7mm/0.27in, 8mm/0.31in, 9mm/0.35in, 10mm/0.39in, 12mm/0.47in Packing List: 10 x End Mill Bits

  • Brand: AFUNTA
  • ASIN: B07DQL66VF
  • UPC: 783710282415
  • Part No: AF-4-flute_end_mill_10
10 Mm 2 Flute - CMT 362.100.11 Two Flute Dowel Drill, 10mm (25/64-Inch) Diameter, 10x30mm Shank, Right-Hand Rotation
CMT 362.100.11 Two Flute Dowel Drill, 10mm (25/64-Inch) Diameter, 10x30mm Shank, Right-Hand

10 Mm 2 Flute

Made of super-strength steel, spiral portion coated with orange PTFE, HWM head with precision balanced center point. 2 Cutting edges, 2 spurs, 2 spiral flutes, parallel shank with driving flat and length adjusting screw.

  • Brand: CMT
  • ASIN: B000P4JJ7G
  • UPC: 664252012626
  • Part No: 362.100.11
10 Mm 2 Flute - SPEED TIGER SE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - AlTiBN Coating - 2 Flute - SE1002T (1 Piece, 10mm)
SPEED TIGER SE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - AlTiBN Coating - 2 Flute - SE1002T (1 Piece,

10 Mm 2 Flute

Speed Tiger SE 2-Flute SeriesSquare nose end mills with AlTiBN coating for excellent wear resistance, 35° helix angle, metric sizing (see Speed Tiger ISE 2-flute series for fractional sizing).Specifications for SE1002TCutting Diameter: 10mm, Cutting Length: 25mm, Shank Diameter: 10mm, Full Length: 75mm, 1pcs/packageApplications: ☑☑ Excellent- Alloy steels- Pre-hardened steels- Hardened steels (HRC40-45)☑ Good- Carbon steels- Hardened steels (HRC45-55)- Cast ironTool material: Speed Tiger 600Nano tungsten carbide steel, 0.6μm grain, ~45 HRC, AlTiBN coating.SPEED TIGER PRECISION TECHNOLOGY CO., LTD. stands for High-QualityEstablished in 1998, Speed Tiger specializes in the production of precision carbide end mills, inserts, and other tungsten carbide steel cutting tools. Speed Tiger crafts cutting tool at nanometer precision. The world's highest precision, ±2μm, enables users to achieve unsurpassed cutting quality and performance.Advanced Production Facilities & Technology - Speed Tiger has 73 sets of grinding machines from Germany, Switzerland, Japan and Taiwan.Professional Coating Facilities & Technology - Speed Tiger has its own coating facilities with equipment from Ionbond and Platit of Switzerland. This gives Speed Tiger the ability to develop specialized coatings b...

  • Brand: SPEED TIGER
  • ASIN: B07FT7K67F
  • Part No: SE1002T
10 Mm 2 Flute - uxcell 2pcs 10mm Shank 10mm x 22mm Straight Flat Nose End Mill Cutter CNC Router Bits 2 Flute
uxcell 2pcs 10mm Shank 10mm x 22mm Straight Flat Nose End Mill Cutter CNC Router Bits 2

10 Mm 2 Flute

Specifications:Material: HSS-ALCutting Diameter: 10mm / 0.39"Shank Diameter: 10mm / 0.39"Cutting Length: 22mm / 0.87"Overall Length: 72mm / 2.83"Number of Flutes: 2Package Content: 2 x Straight End Mill Cutter, 2 x Plastic Box Description:1.Suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.2.With high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.3.Sharp and durable, convenient for chip removal, further improve machining efficiency.4.Make sure work piece and machine are stable,use hydraulic chucks,high quality collet chucks,or shrink fit chucks.5.Please adjust the speed, feed and cutting depth according to actual cutting conditions.6.Adapt to several kinds of cooling conditions, for example oil mist, air cooling.

  • Brand: uxcell
  • ASIN: B07M9MQS8X
  • Part No: B07M9MQS8X
10 Mm 2 Flute - uxcell 10mmx2mm 6-Flute Straight Shank T Slot End Mill
uxcell 10mmx2mm 6-Flute Straight Shank T Slot End

10 Mm 2 Flute

Straight shank,T shaped slot,HSSAL material.Used widely for milling steel, aluminum, copper and iron.

  • Brand: uxcell
  • ASIN: B01BHDYJGE
  • UPC: 602451041382
  • Part No: a15120700ux0539
10 Mm 2 Flute - HUHAO 10mm Router Bit 2 Flute Square Nose End Mill,Finishing Cut,Spiral Bit Cutter Hard Tungsten Steel Coating Solid Carbide for Aluminum and Other Non Ferrous Metals
HUHAO 10mm Router Bit 2 Flute Square Nose End Mill,Finishing Cut,Spiral Bit Cutter Hard Tungsten Steel Coating Solid Carbide for Aluminum and Other Non Ferrous

10 Mm 2 Flute

Material:Tungsten steel Shank Diameter: 4-20mm Cutting Edge Diameter:1.0-20mm Cutting Edge Length:3-45mm Overall Length: 50-100mm Quantity: 1set (1pcs) Features: Up-cut endmills direct woodchips up and away from the milling area leaving an unobstructed path for the endmill. Bit breakage is less likely. Up cut end mills are the best choice for most standard millling applications. The up cut direction can leave behind a minimally rough top surface edge. Pros: Quick and efficient milling, chip removal. Cons: Can cause minimal top surface edge roughness or tear-away. (Choose a down cut spiral bit for projects that require smooth top surface edges.) Application: Die steel, cast iron, carbon steel, alloy steel, tool steel, heat treatment steel and other general steel,Iron and brass, other precision parts processing Guaranty: Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund. Package include: 1PCS End Mill Engraving Mill Cutter

  • Brand: HUHAO
  • ASIN: B07CN44WSX
10 Mm 2 Flute - uxcell 10mm Cutting HSSAL Spiral Drill Bit Straight End Mill Cutter 2 Flute with 10mm Shank
uxcell 10mm Cutting HSSAL Spiral Drill Bit Straight End Mill Cutter 2 Flute with 10mm

10 Mm 2 Flute

Specifications:Material: HSS-ALCutting Diameter: 10mm / 0.39"Shank Diameter: 10mm / 0.39"Cutting Length: 45mm / 1.77"Overall Length: 95mm / 3.74"Number of Flutes: 2Package Content: 1 x Straight End Mill Cutter, 1 x Plastic Box Description:1.Suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.2.With high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.3.Sharp and durable, convenient for chip removal, further improve machining efficiency.4.Make sure work piece and machine are stable,use hydraulic chucks,high quality collet chucks,or shrink fit chucks.5.Please adjust the speed, feed and cutting depth according to actual cutting conditions.6.Adapt to several kinds of cooling conditions, for example oil mist, air cooling.

  • Brand: uxcell
  • ASIN: B07MM51MK2
  • Part No: a18120800ux0241
10 Mm 2 Flute - VonShef 9 oz. Stainless Steel Flute (Set of 2)
VonShef 9 oz. Stainless Steel Flute (Set of

10 Mm 2 Flute

  • Color: BronzeCopper
  • Price: 14
10 Mm 2 Flute - iMeshbean 12 Hole Ceramic Flute Alto C Legend of Zelda Ocarina Flute Blue Instrument, Dark Blue
iMeshbean 12 Hole Ceramic Flute Alto C Legend of Zelda Ocarina Flute Blue Instrument, Dark

10 Mm 2 Flute

  • Color: BlueDark Blue
  • Rating: 5.0
  • Price: 9
10 Mm 2 Flute - Jean Paul FL-220 Flute with Case
Jean Paul FL-220 Flute with

10 Mm 2 Flute

  • Model: FL-220
  • Color: Silver
  • Price: 199 199
10 Mm 2 Flute - Portable Educational Instrument Alto F Transverse Bamboo Flute w 10 Holes
Portable Educational Instrument Alto F Transverse Bamboo Flute w 10

10 Mm 2 Flute

  • Color: Black and Red and Wood ColorBlack
  • Rating: 1.0
  • Price: 8 22
10 Mm 2 Flute - 12 Hole Alto C Ocarina Vessel Flute ABS Material Sweet Potato Shape with 2 Protective Bags Musical Gift for Beginners
12 Hole Alto C Ocarina Vessel Flute ABS Material Sweet Potato Shape with 2 Protective Bags Musical Gift for

10 Mm 2 Flute

  • Rating: 5.0
  • Price: 13 14
10 Mm 2 Flute - Blue 12 Hole Ocarina Instrument Ceramic Alto C Flute Flute Made of Clay Musical Instrument Ocarina
Blue 12 Hole Ocarina Instrument Ceramic Alto C Flute Flute Made of Clay Musical Instrument

10 Mm 2 Flute

  • Color: Blue
  • Size: (approx) 160mm X 100mm X 40mm
  • Price: 12 26
10 Mm 2 Flute - Beginners Pan Flute 16 Pipes Music Instrument Panpipe Easy Learn Awesome New
Beginners Pan Flute 16 Pipes Music Instrument Panpipe Easy Learn Awesome

10 Mm 2 Flute

  • Price: 27 83

10 Mm 2 Flute Video Results

HSS 4 Flute CNC End Mill Cutter 10mm

10 Mm 2 Flute

Cast Iron Cutting, using 4 Flute CNC End Mill Cutter 10mm, mill two U type hole. where to buy: https://www.banggood.com/10pcs-HSS-4-Flute-CNC-End-Mill-Cutter-1_5-10mm-Straight-Shank-End-Mill-Cutter-p-1076080.html?p=57221915418294201710

  • Likes: 5
  • View count: 1539
  • Dislikes: 0
  • Comments:
Tags: cnc,cast oron,flute,mill,cutter,machine

Spianatura di un listello di alluminio fresa 10mm 2 flute affondo 0.25mm

10 Mm 2 Flute

Spianatura di un listello usando fresa da 10mm 2 taglienti.9000 rpm kress fme1050 Ancorato tramite piano aspirato.

  • Likes: 3
  • View count: 31
  • Dislikes: 0
  • Comments:
Tags:

Facing alu with 10mm VHM 2-flute

10 Mm 2 Flute

Facing alu with 10mm VHM 2-flute

  • Likes: 0
  • View count: 170
  • Dislikes: 0
  • Comments:
Tags: 00323,2009,10,30,13,31,34


10 Mm 2 Flute C6073 Search Results

Looking for more 10 Mm 2 Flute similar ideas? Try to explore these searches: Welded Steel Frame, Striped V-neck Tank, and Victorian Garden Porch Swing.

Globeiz.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates